Initial Setup
Initial setup for Ditto Firmware first time user
① PC Setup
Main PC
Disable following options
- PCIe Native Power Management -> Disable
- XHCI Toggle -> Enable
- MSI Fast Start -> Disable
- Fast Boot -> Disable
- Local ASPM -> Disable
If some motherboards don’t have these features, they can be ignored
Use our Custom PowerCFG
- Run
Powershell
as ADMINISTRATOR. - Paste, Run following command and hit
Enter
.
- In windows search, search
powercfg.cpl
and open it. - Choose
Excellent
Plan.
Second PC
Required Runtime
WebView2
Download and go through the installation.
VC Runtime
Download latest VisualCppRedist_AIO_x86_x64.exe
and go through the installation.
DirectX Runtime
Download and go through the installation.
Install all runtime above.
Replacing Leechcore
Recommended backup the original leechcore.dll
before replacing it.
- Download the
Modified Leechcore
above. - Open your DMA Software folder, replace the
leechcore.dll
with the downloadedleechcore.dll
.
② Flash in your Ditto Firmware
PRECAUTION
- Ditto Firmware requires firmware activation every time the host computer is powered on, otherwise it will not load Windows properly.
- Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.
- Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.
- Do not flash Ditto Firmware without owning/purchasing a Ditto Firmware Subscription.
Ditto Firmware
Download suitable Firmware Type for your DMA board.
Flash Firmware [Auto]
Go through this steps for fully auto firmware flashing. (Recommended)
Flash Firmware [Manual]
Go through this steps for manual firmware flashing.
Which Firmware Type to download?
Activator Naming Logic: [Activator] Ditto
+ Build Number
+ Version.exe
Example: [Activator] Ditto_030Preview15.exe
== Ditto Version 0.3.0 Preview 15
Firmware Naming Logic: [Firmware]
+ Build Number
+ Version
+ Board Type
Example: [Firmware] 030Preview11_35T.bin
== 35T Firmware Version 0.3.0 Preview 15
- 35T DMA Board -> Choose download firmware with
35T
/squirrel_top
- 75T DMA Board -> Choose download firmware with
75T
/x1_top
- 100T DMA Board -> Choose download
100T
/zDMA
- M.2 DMA Board -> Choose download
M2
/m2_top