​

Firmware VMD NVMe

Firmware VMD NVMe fully emulates a genuine NVMe drive behind Intel’s Virtual RAID on CPU (VMD). By running under VMD, the system and anti-cheat solutions see only the Intel VMD controller, never enumerating the actual NVMe device. This firmware includes a 1:1 CFG space dump, proper Base Address Register (BAR) support, and NVMe driver compatibility, ensuring minimal detection risk and seamless integration—just like a real device.

​

Requirements

• Intel CPU (11th Generation or newer)
• Intel VMD (Virtual RAID on CPU) must be enabled in BIOS
• Specific Intel drivers must be installed on Windows
• A Windows reinstall may be required for proper driver initialization and device recognition

​

Features

​

- 100% CFG

Your firmware’s configuration space will exactly match that of a legitimate device, ensuring seamless integration and CFG detection as an authentic device.

​

- BAR Support

BAR (Base Address Register) is the memory data inside the PCIe device. The BIOS retrieves this information to interact with the device correctly.

​

- Emulation

Proper BAR response ensures that when the driver sends a message to the PCIe device’s BAR, the BAR responds with the appropriate data, mimicking real device behavior.

​

Compatibility

​

- DRV Scan

Green on DRVScan Tool.

​

- Anti-Cheats Supported

Supports ALL anti-cheats.

​

Access

​

- Unzip Password

beater.solutions

With thanks to authors@AbigailForeigner