Get DMA ID Manual (New Method)
Last updated
Last updated
Download & Extract Toolset
Reminder
Please completely uninstall the anti-cheat software running at startup before dumping the device list. (Vanguard, Faceit, ACE, 5E, Wanmei, etc.)
All operations are performed on the Second PC.
The port closest to the gold finger is the JTAG port, while the one farthest from it is the DATA port.
Firmware Flasher Tools Pack -> [Click to Download]
Your DMA are either I. RS232 DMA Driver (LeetDMA, CaptainDMA, Others) or II. CH347 DMA Driver (ScartletDMA, CaptainDMA, PeeperDMA, Hackdma and Others).
Try both if you don't know which one you are.
Download the tools above and extract. Open Drivers folder -> Run zadiag.exe
Click Options -> List All Devices
On USB Device, Choose Quad RS232-HS(Interface 0)
You must select “Interface 0", otherwise it is likely to cause DMA damage.
Can't find the device? Double check your dma is plugged to JTAG port or try CH347 DMA Burning
Press "Replace Driver" or "Install Driver" and wait until the driver installed, installation take up to 5 minutes.
After successfully, close the zadiag and goto next step.
Download the tools above and extract. Open Drivers folder -> Open CH341PAR -> Open CH341PAR -> Run & Install SETUP.exe
Can't find the device? Double check your dma is plugged to JTAG port or try #i.-rs232-dma-driver
Based on your DMA board type (35T / 75T), run the corresponding .bat file
If you're unsure whether to choose CH347 or RS232, just run both; one of them will display the ID.
This is how the correct results looks like ⬇️
Copy the ID and send in your ticket. After that tag Scarletlab for firmware produce.