Scarlet Docs home page
English
Search...
⌘K
Store
Support
Visit Site
Visit Site
Search...
Navigation
Dichen Mini
Troubleshooting
DMA Guides
Firmware Guides
No-HWID & Spoofer Guides
Official Website
Community
View Purchased Key
Get Started
Introduction to Scarlet
Introduction to DMA
Introduction to Fuser
Introduction to Kmbox
Loader Guides
Setup the Cheat
Change Language
Reset HWID
Troubleshooting
Game Guides
Apex Legends Guides
Arena Breakout Guides
Counter-Strike 2 Guides
Dead by Daylight Guides
Delta Force Guides
PYBG Guides
The Finals Guides
Valorant Guides
Hardware Guides
DMA Board
Fuser
Dichen 4/5/6
Dichen Mini
Setup Instruction
Troubleshooting
Dichen P1
Kmbox
ESP w/o Fuser
On this page
Screen display shows no signal, even though all connections are Complete
Screen display shows no signal, even though all connections are Complete
Screen display shows no signal, even though all connections are Complete
Dichen Mini
Troubleshooting
Solutions for Error & Bugs
Screen display shows no signal, even though all connections are Complete
Problems
LP red light stays ON
L3 and L4 blue lights are flashing
Solutions
Check if the Main Display’s power is connected
Ensure the HDMI 1 Interface is connected to the Main Display. (The issue lies with the Main Display)
Screen display shows no signal, even though all connections are Complete
Problems
LP red light stays ON
L1 and L2 green lights stay ON
L3 is flashing
L4 is OFF
Solutions
Use a third computer to remotely connect to the Second PC (Cheat PC) and adjust its refresh rate to 60Hz, then increase it incrementally:
(For 1K resolution: 60-120-144-240)
(For 2K resolution: 60-120-144)
Screen display shows no signal, even though all connections are Complete
Identify
Second PC (Cheat PC) using AMD integrated or Dedicated GPU
Solutions
Use a third computer to remotely connect to the Second PC (Cheat PC) and access the AMD driver program. Change the dolor depth to
8-bit
.
Setup Instruction
Information & Warranty
Assistant
Responses are generated using AI and may contain mistakes.